I decided not to attend the optional evening talk which was organised on day one of Lyda Rump’s workshop as I really wanted to get started laying out my backpack. The resist had been cut out of laminate floor underlay as usual and I started by rolling the handle and also the dreadlocks to attach to the bottom of the bag and to use as a closure. The ends of the handle and the dreadlocks were left dry so as to make it easier for them to felt into the middle of the bag when I added them at layer two. It took me 40 minutes of pondering before I realised how to go about laying out my inside pocket and then I laid out one layer of the bag as well before calling it a night. At breakfast the next morning fellow Irish felter Maureen Cromer pointed out that the way I had positioned the pocket was not how Lyda had explained the day before so so much for all my efforts that evening! I had a word with Lyda at the beginning of day two and although my way would have worked I decided to start again as I really wanted to learn the simplest and most efficient method, that was why I was there!! Lyda places the bag template on the working surface, covers it with the bubble wrap, lays the full 3 layers of the pocket, positions the pocket resist on top of it, lays the first layer of the back of the bag and then removes the resist from under the bubble wrap and places it on top of the layer of wool. Then she folds over the wool around the edge of the resist and lays out the first layer on the other side of the bag. Try it with a piece of paper on your table, it works and is a simple way of positioning the pocket in the correct place internally. The glass nuggets and the bag straps were lightly needled in after layer 2 (this was C1 wool) and then the final layer of merino with it’s silk and gauze surface decoration was laid. To skip to the completion of the bag, I rolled, re-wet with hot water, rolled and rolled again to fully finish the felting process and ensure that the backpack was as tough and rugged as possible without loosing the integrity of the beautiful merino, silk and gauze finish. When I was sure that the package was shrinking and holding together as per usual I cut out the resist and at the very end I cut a tiny cross on top of the glass nuggets and then worked the area with my fingernail to widen the opening and expose the glass. The final technique was to shave the surface of the bag like Mehmet Girgic does with his rugs and this leaves a beautiful finish allowing all the fabrics, fibres and glass to be shown to the best advantage. Because I really worked hard on fulling my backpack the finished bag has handles that actually have shrunk more than I intended. As I am tall the bag now sits very high on my back so for the moment I am wearing it as a shoulder bag until I make extension loops to add to the ends of the straps! Holly Angle took some good quality photos of the bag so as soon as I get them via email I will post them here and to Flickr.